Galfab

Galfab, HD Extendible Tail Hoist (NEX Series)

Condition: Build to Order

Make: Galfab

Partners: Galfab, Municipal Equipment, Inc., SWAT (Solid Waste Applied Technologies)

The Galfab NEX Series hoist is capable of handling heavier loads (60,000 and 75,000 lb. capacity) and is great for scrap applications. NEX Series hoists feature a solid 10” mainframe, a low 48-degree dump angle, standard inside controls, and an extremely durable rear hinge.

10″ x 4″ x 3/8” Main Frame Tube
½ inch x 3 ½ inch Wear Strip on Top
½” x 4 inch Stiffener on the Bottom of the Main Frame
No Sub Frame
All Working Points Greaseable
2 1/2″ Diameter Rear Hinge
Pintle Ready Apron
Auto Fold Forward DOT Bumper
1″ Spring Loaded Container Locks
2 1/2″ Diameter Lift Cylinder Shafts
12″ Diameter Vertical Sheave and 10″ Horizontal Sheaves
3/8 inch x 3 inch Winch Cylinder Rod Covers
6 Inboard and Outboard Supported Outside Rollers
Container Long Sill Supports on Rear of Hoist Mainframe
48 Gallon Oil Reservoir with Sight and Temperature Gauge
25 Micron Filtration
Inside and Outside Controls
LED Lighting System
Choice of Forward or Reverse Mount Single Stage or Telescopic Lift Cylinders
7/8” Cable with Heavy Duty Swivel Eye Hook
80 inch Extendible Tail
No DOT Bumper
Container Long Sill Supports
Front Mount Pump
Hoist Up Warning Light
Sealed Wiring System
Hoist Up Alarm
Backup Alarm

“The Hooker” Hold On System
Auxiliary Stops
Work Lights
Behind Cab and Oversize Oil Tanks
Tool Boxes
Poly or Steel Fenders
Aluminum Fenders
Tarping Systems
Ratchet Tie Down Straps
Pintle Hook
Front Mount Pump
PTO
Drop Shaft
On-Board Scale Systems
Rear View Camera Systems
Integrated hydraulics can be used, if hydraulic tarping system is used

Model	Capacity	CA	CA with tarp	Length	Dump Angle Tail Retracted	Dump Angle Tail Extended	Up (sec)*	Down (sec)*	On (sec)*	Off (sec)*	Lift Cylinder	Winch Cylinder	Container Length ft	Apx Weight lbs
NEX60174S072	60,000	174″	186″	19′ 10″	48°	28°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NEX60174S072R	60,000	174″	186″	19′ 10″	48°	28°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NEX60174T121	60,000	174″	186″	19′ 10″	48°	28°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7225
NEX75174S072F7	75,000	174″	186″	19′ 10″	48°	28°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NEX75174S072R7	75,000	174″	186″	19′ 10″	48°	28°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NEX75174T121	75,000	174″	186″	19′ 10″	48°	28°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7350
NEX60194S072	60,000	194″	206″	22′ 4″	48°	28°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NEX60194S072R	60,000	194″	206″	22′ 4″	48°	28°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NEX60194T121	60,000	194″	206″	22′ 4″	48°	28°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075
NEX75194S072F7	75,000	194″	206″	22′ 4″	48°	28°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NEX75194S072R7	75,000	194″	206″	22′ 4″	48°	28°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NEX75194T121	75,000	194″	206″	22′ 4″	48°	28°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075