Galfab

Galfab, Dead Lift Hoist (HH Series)

Condition: Build to Order

Make: Galfab

Partners: Galfab, Municipal Equipment, Inc., SWAT (Solid Waste Applied Technologies)

The Galfab Dead Lift cable hoist utilizes the two rear flange rollers as well as a center cable roller to pull the container straight up and winch onto the hoist frame. This hoist is best utilized in tight spaces and is also available in an extendable tail option (EH Series).

8″ x 4 x 1/2″ Main Frame Tube
3″ x 2″ x 1/4″ Sub Frame
2 1/2″ Diameter Rear Hinge
All Working Points Greaseable
Pintle Ready Apron
1″ Spring Loaded Container Locks
2 1/2″ Diameter Lift Cylinder Shafts
Interchangeable 10″ Vertical and Horizontal Sheaves
3/8 inch x 3 inch Winch Cylinder Rod Covers
6 Inboard and Outboard Supported Outside Rollers
Container Long Sill Supports on Rear of Hoist Mainframe
Heavy Duty Rear Guide Rollers
48 Gallon Oil Reservoir with sight and Temperature Gauge
25 Micron Filtration
Inside and Outside Controls
LED Lighting System
Choice of Forward or Reverse Mount Single Stage or Telescopic Lift Cylinders
7/8” Cable with Deadlift Knuckle Hook Link
Front Mount Pump
Hoist Up Warning Light
Sealed Wiring System
Hoist Up Alarm
Backup Alarm

Behind Cab and Oversize Oil Tanks
Tool Boxes
Auxiliary Stops
Poly or Steel Fenders
Aluminum Fenders
Tarping Systems
Hooker Hold On Systems
Ratchet Tie Down Straps
PTO
Rear View Camera Systems
Work Lights
Onboard Scale Systems
Drop Shaft
Integrated hydraulics can be used, if hydraulic tarping system is used

Model	Rated Capacity	CT	Length	Dump Angle	Up (sec)*	Down (sec)*	On (sec)*	Off (sec)*	Lift Cylinder	Winch Cylinder	Container Length	Apx Weight lbs
HH50174S072	50,000	174″	19′	47	30	13	46	37	6″ – 4 1/2″ X 74 1/2″	7″ – 3″ X 81 1/2″	18′ TO 20′	7500
HH50174T121	50,000	194″	19′	47	43	10	46	37	6″ – 5 – 4″ X 121″	7″ – 3″ X 81 1/2″	18′ TO 20′	8300
HH50194T121	50,000	194″	20′ – 8′	47	43	10	46	37	6″ – 5 – 4″ X 121″	7″ – 3″ X 91 1/2″	20′ TO 24′	8500

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

CAUTION: This Equipment Should be Operated by Properly Trained Personnel. Improper Use, Misuse, or Lack of Maintenance Could Cause Injury to Persons or Property. Photos used in this brochure are illustrative only. We reserve the right to make changes at any time without notice. Information contained within this literature is believed to be the most accurate available at the time of printing.

Please contact one of the EMP Partner(s) below: