Galfab

Galfab, Short Extendible Tail Hoist (OX Series)

Condition: Build to Order

Make: Galfab

Partners: Galfab, Municipal Equipment, Inc., SWAT (Solid Waste Applied Technologies)

The Short Extendible Tail roll-off hoist has a 40” tail extension in lieu of the 80” extension which allows for this model to come standard with the Galfab Auto-Fold DOT bumper. This hoist allows for low loading height for limited overhead clearance as well as the ability to pick up below ground level. This hoist is also available in the 8” mainframe and 2” subframe and the 10” sub frameless hoist. Combines the versatility of an outside rail hoist with the flexibility of an extendable tail.

8″ x 4 x 3/8” Main Frame Tube
½ inch x 3 ½ inch Wear Strip on Top
3″ x 2″ x 1/4″ Subframe
2 1/2″ Diameter Rear Hinge
All Working Points Greaseable
Pintle Ready Apron
1″ Spring Loaded Container Locks
2 1/2″ Diameter Lift Cylinder Shafts
Interchangeable 10 ” Vertical and Horizontal Sheaves
3/8 inch x 3-inch Winch Cylinder Rod Covers
6 Inboard and Outboard Supported Outside Rollers
48 Gallon Oil Reservoir with Sight and Temperature Gauge
25 Micron Filtration
Inside and Outside Controls
Choice of Forward or Reverse Mount Single-Stage or Telescopic Lift Cylinders
LED Lighting System
7/8” Cable with Heavy Duty Swivel Eye Hook
40-inch Extendible Tail
Galfab Auto-fold DOT Bumper
Front Mount Pump
Hoist Up Warning Light
Sealed Wiring System
Hoist Up Alarm
Backup Alarm

Behind Cab and Oversize Oil Tanks
Tool Boxes
Auxiliary Stops
Poly or Steel Fenders
Aluminum Fenders
Tarping Systems
Hooker Hold On Systems
Ratchet Tie Down Straps
Integrated hydraulics can be used, if hydraulic tarping system is used
PTO
Drop Shaft
Rear View Camera Systems
Work Lights
Onboard Scale Systems

Model	Capacity	CA	CA with tarp	Length	Dump Angle Tail Retracted	Dump Angle Tail Extended	Up (sec)*	Down (sec)*	On (sec)*	Off (sec)*	Lift Cylinder	Winch Cylinder	Container Length ft	Apx Weight lbs
OX60174S072	60,000	174″	186″	23’3″	48°	28°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OX60174S072R	60,000	174″	186″	23’3″	48°	28°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OX60174T121	60,000	174″	186″	23’3″	48°	28°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7225
OX75174S072F7	75,000	174″	186″	23’3″	48°	28°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OX75174S072R7	75,000	174″	186″	23’3″	48°	28°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OX75174T121	75,000	174″	186″	23’3″	48°	28°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7350
OX60194S072	60,000	194″	206″	24’11”	48°	28°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OX60194S072R	60,000	194″	206″	24’11”	48°	28°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OX60194T121	60,000	194″	206″	24’11”	48°	28°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075
OX75194S072F7	75,000	194″	206″	24’11”	48°	28°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OX75194S072R7	75,000	194″	206″	24’11”	48°	28°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OX75194T121	75,000	194″	206″	24’11”	48°	28°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075