Excel Manufacturing HV Series Balers
Excel’s HV balers have the revolutionary single sheet, interlocking construction found in our two ram balers. The HV9 & HV10 bale newspaper, office paper, magazines, OCC, PET, HDPE, aluminum and tin cans without preconditioning. Their indestructable design enables the baling of painted aluminum siding, radiators, aluminum extrusion, and insulated wires. The HV Series offer two ram power in a single ram baler.
Features
- Patented Hydraulic Bale Pusher Bar (HV10 baler only) Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
- The HV9 & HV10 balers are manufactured standard with wither left-hand or right-hand hopper and controls
- 50 HP TEFC Motor, Standard Voltage – 460 Volt, 60 Hertz, 3 Phase
- Industrial Hardened Logic Controller
- Hardox® 400 Replaceable Wear Liners
- 300 Gallon Hydraulic Reservoir with Regenerative Circuit
- Excel’s 1-2-3 Warranty (1 year Labor, 2 Years Parts, 3 years Structural & Cylinder) (USA Only)
- Tongue and Groove Corrugated Floor
- NEMA 12 rated Enclosures and Controls on Moveable Pedestal
- Castle Key Safety Interlocking System
- Full Bale Chamber Penetration
- Standard Hopper with Inspection Window
- Clean Out Tool, Grease Gun, and Extra Spray Paint
- One Bundle of 12 gauge x 13 ft. Single Loop Wire Ties
- Paint – Excel Blue
- Air to Oil Heat Exchanger
- Lower Photo Eye
- UL, CUL, CE Approved
- Available with Excel integrated conveyers with rubber or steel belts for a turn-key system
Specifications
Structural
- AUTOMATIC CLOSED END BALING PRESS
- HEIGHT : 62” Loading 52 1/2” Frame (158cm)
- LENGTH : 179” (455cm)
- WIDTH : 77” (196cm)
- CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
- FEED OPENING : 54”W (137cm) x 35”L (89cm)
- BALER SHIPPING WEIGHT : 18,760 lbs. (8,509kg) (as shown)
Performance Data
- PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated
- DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design
- CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod
- OIL RESERVOIR : 105 gal. (399 liters)
- DOOR LATCH CYL. : N/A
- MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
- ENCLOSUR : NEMA 12 Rated, UL Approved
- CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated
- HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
- OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)
- PLATEN PSI : 92 PSI (6.33 BAR)
- CYCLE TIME : 46 sec. – 30 sec. Short Stroke
- TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)
Bale Weights *
- OCC : 1,200 lbs. (544kg) TPH 2.4
- MAGAZINES : 2,000 lbs. (907kg) TPH 5
- NEWSPAPER : 1,500 lbs. (680kg) TPH 4.5
- OFFICE PAPER : 1,600 lbs. (726kg) TPH 4.8
- HDPE : 1,100 lbs. (499kg) TPH 1.7
- PET : 800 lbs. (363kg) TPH 1.1 (May vary with percent of capped bottles)
- ALUMINUM CANS : 625 lbs. (284kg) TPH 1.9
- TIN CANS : 1,200 lbs. (544kg) TPH 3
Applications
HV9 Series Balers bale the following materials:
- Office Paper
- Newspaper
- OCC
- Magazines
- PET
- HDPE
- Aluminum Cans
- Tin Cans
- Plastic Film
- Carpet Padding
- Textiles
- Other materials
Features
- Patented Hydraulic Bale Pusher Bar (HV10 baler only) Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
- The HV9 & HV10 balers are manufactured standard with wither left-hand or right-hand hopper and controls
- 50 HP TEFC Motor, Standard Voltage – 460 Volt, 60 Hertz, 3 Phase
- Industrial Hardened Logic Controller
- Hardox® 400 Replaceable Wear Liners
- 300 Gallon Hydraulic Reservoir with Regenerative Circuit
- Excel’s 1-2-3 Warranty (1 year Labor, 2 Years Parts, 3 years Structural & Cylinder) (USA Only)
- Tongue and Groove Corrugated Floor
- NEMA 12 rated Enclosures and Controls on Moveable Pedestal
- Castle Key Safety Interlocking System
- Full Bale Chamber Penetration
- Standard Hopper with Inspection Window
- Clean Out Tool, Grease Gun, and Extra Spray Paint
- One Bundle of 12 gauge x 13 ft. Single Loop Wire Ties
- Paint – Excel Blue
- Air to Oil Heat Exchanger
- Lower Photo Eye
- UL, CUL, CE Approved
- Available with Excel integrated conveyers with rubber or steel belts for a turn-key system
Specifications
Structural
- HEIGHT : 62” Loading 52 1/2” Frame (158cm)
- LENGTH : 179” (455cm)
- WIDTH : 77” (196cm)
- CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
- FEED OPENING : 54”W (137cm) x 35”L (89cm)
- BALER SHIPPING WEIGHT : 18,960 lbs. (8,600kg) (as shown)
Performance Data
- PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated
- DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design
- CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod
- OIL RESERVOIR : 105 gal. (399 liters)
- DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Strokex 2” (5cm) Rod
- MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
- ENCLOSURE : NEMA 12 Rated, UL Approved
- CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated
- HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
- OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)
- PLATEN PSI : 92 PSI (6.33 BAR)
- CYCLE TIME : 29 sec. – 21 sec. Short Stroke
- TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)
Bale Weights *
- OCC : 1,200 lbs. (544kg) TPH 3.3
- MAGAZINES : 2,000 lbs. (907kg) TPH 7.5
- NEWSPAPER : 1,500 lbs. (680kg) TPH 6.4
- OFFICE PAPER : 1,600 lbs. (726kg) TPH 6.8
- HDPE : 1,100 lbs. (499kg) TPH 2.3
- PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
- ALUMINUM CANS : 625 lbs. (284kg) TPH 2.3
- TIN CANS : 1,200 lbs. (544kg) TPH 4.5
Applications
HV10 Series Balers bale the following materials:
- Office Paper
- Newspaper
- OCC
- Magazines
- PET
- HDPE
- Aluminum Cans
- Tin Cans
- Plastic Film
- Carpet Padding
- Textiles
- Other materials
Please contact one of the EMP Partner(s) below:
