Galfab

Galfab, HD Inside/Outside Rail Hoist (NIO Series)

Condition: Build to Order

Make: Galfab

Partners: Galfab, Municipal Equipment, Inc., SWAT (Solid Waste Applied Technologies)

The Heavy Duty Inside/Outside Rail Hoist has the versatility to pick up inside and outside rail containers. The IO Hoist comes standard with inside rollers. This hoist has a Cor-Ten divider rail and inside rollers for the inside rail containers.

10″ x 4″ x 1/2″ Main Frame Tube
3″ x 3″ x 1/2″ Cor Ten Top Divider Angle
1/2” x 4 inch Stiffener on the Bottom of the Main Frame
No Sub Frame
All Working Points Greaseable
2 1/2″ Diameter Rear Hinge
Pintle Ready Apron
Auto Fold Forward DOT Bumper
1″ Spring Loaded Container Locks
2 1/2″ Diameter Lift Cylinder Shafts
12″ Diameter Vertical Sheave and 10″ Horizontal Sheaves
3/8 inch x 3 inch Winch Cylinder Rod Covers
6 Inboard and Outboard Supported Outside Rollers
Container Long Sill Supports on Rear of Hoist Mainframe
Cor Ten Divider
48 Gallon Oil Reservoir with Sight and Temperature Gauge
25 Micron Filtration
Inside and Outside Controls
Choice of Forward or Reverse Mount Single Stage or Telescopic Lift Cylinders
LED Lighting System
7/8” Cable with Heavy Duty Swivel Eye Hook
4 Inside Rollers
Front Mount Pump
Hoist Up Warning Light
Sealed Wiring System
Hoist Up Alarm
Backup Alarm

“The Hooker” Hold On System
Auxiliary Stops
Work Lights
Behind Cab and Oversize Oil Tanks
Tool Boxes
Poly or Steel Fenders
Aluminum Fenders
Tarping Systems
Ratchet Tie Down Straps
Pintle Hook
Front Mount Pump
PTO
Drop Shaft
On-Board Scale Systems
Rear View Camera Systems
Integrated hydraulics can be used, if hydraulic tarping system is used

Model	Capacity	CA	CA with tarp	Length	Dump Angle	Up (sec)*	Down (sec)*	On (sec)*	Off (sec)*	Lift Cylinder	Winch Cylinder	Container Length ft	Apx Weight lbs
NIO60174S072	60,000	174″	186″	23’3″	48°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NIO60174S072R	60,000	174″	186″	23’3″	48°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NIO60174T121	60,000	174″	186″	23’3″	48°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7225
NIO75174S072F7	75,000	174″	186″	23’3″	48°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NIO75174S072R7	75,000	174″	186″	23’3″	48°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
NIO75174T121	75,000	174″	186″	23’3″	48°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7350
NIO60194S072	60,000	194″	206″	24’11”	48°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NIO60194S072R	60,000	194″	206″	24’11”	48°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NIO60194T121	60,000	194″	206″	24’11”	48°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075
NIO75194S072F7	75,000	194″	206″	24’11”	48°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NIO75194S072R7	75,000	194″	206″	24’11”	48°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
NIO75194T121	75,000	194″	206″	24’11”	48°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

CAUTION: This Equipment Should be Operated by Properly Trained Personnel. Improper Use, Misuse, or Lack of Maintenance Could Cause Injury to Persons or Property. Photos used in this brochure are illustrative only. We reserve the right to make changes at any time without notice. Information contained within this literature is believed to be the most accurate available at the time of printing.

Please contact one of the EMP Partner(s) below: