Galfab

Galfab, Standard Duty Hoists, Outside Rail Hoist (OR Series)

Condition: Build to Order

Make: Galfab

Partners: Galfab, Municipal Equipment, Inc., SWAT (Solid Waste Applied Technologies)

The Outside Rail roll-off hoist is the most commonly used hoist in the industry today. Galfab offers this hoist with an 8” mainframe and 2” subframe or the very popular 10” sub frameless hoist. Available in 60k and 75k pound models to fit any application.

8″ x 4 x 1/2″ Main Frame Tube
3″ x 2″ x 1/4″ Subframe
2 1/2″ Diameter Rear Hinge
All Working Points Greaseable
Pintle Ready Apron
Auto Fold Forward DOT Bumper
1″ Spring Loaded Container Locks
2 1/2″ Diameter Lift Cylinder Shafts
Interchangeable 10″ Vertical and Horizontal Sheaves
3/8 inch x 3-inch Winch Cylinder Rod Covers
6 Inboard and Outboard Supported Outside Rollers
Container Long Sill Supports on Rear of Hoist Mainframe
48 Gallon Oil Reservoir with Sight and Temperature Gauge
25 Micron Filtration
Inside and Outside Controls
LED Lighting System
Choice of Forward or Reverse Mount Single-Stage or Telescopic Lift Cylinders
7/8” Cable with Heavy Duty Swivel Eye Hook
Galfab Auto-fold DOT Bumper
48-Degree Dump Angle on all Models
2 Minute Loading Cycle Time* Keeping your Drivers on the Road
Hoist Up Alarm
Backup Alarm

Behind Cab and Oversize Oil Tanks
Tool Boxes
Auxiliary Stops
Poly or Steel Fenders
Aluminum Fenders
Tarping Systems
“The Hooker” Hold On System
Ratchet Tie Down Straps
Pintle Hook
Front Mount Pump
PTO
Drop Shaft
On Board Scale Systems
Work Lights
Rear View Camera Systems
Integrated hydraulics can be used, if hydraulic tarping is used

Model	Capacity	CA	CA with tarp	Length	Dump Agle	Up (sec)*	Down (sec)*	On (sec)*	Off (sec)*	Lift Cylinder	Winch Cylinder	Container Length ft	Apx Weight lbs
OR60174S072	60,000	174″	186″	23’3″	48°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OR60174S072R	60,000	174″	186″	23’3″	48°	27	15	41	28	6″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OR60174T121	60,000	174″	186″	23’3″	48°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7225
OR75174S072F7	75,000	174″	186″	23’3″	48°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OR75174S072R7	75,000	174″	186″	23’3″	48°	37	23	41	28	7″ x 4″ x 72″ DA	7″ x 4″ x 79.5″ DA	18′-22′	7550
OR75174T121	75,000	174″	186″	23’3″	48°	35	29	41	28	6″-5″-4″ x 121″ DAT	7″ x 4″ x 79.5″ DA	18′-22′	7350
OR60194S072	60,000	194″	206″	24’11”	48°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OR60194S072R	60,000	194″	206″	24’11”	48°	27	15	46	31	6″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OR60194T121	60,000	194″	206″	24’11”	48°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075
OR75194S072F7	75,000	194″	206″	24’11”	48°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OR75194S072R7	75,000	194″	206″	24’11”	48°	37	23	46	31	7″ x 4″ x 72″ DA	7″ x 4″ x 89.5″ DA	20′-24′	7850
OR75194T121	75,000	194″	206″	24’11”	48°	35	29	46	31	6″-5″-4″ x 121″ DAT	7″ x 4″ x 89.5″ DA	20′-24′	8075

* Cycle Times are Factory developed and controlled by PTO output, oil viscosity, human and mechanical efficiency, and may vary accordingly.

CAUTION: This Equipment Should be Operated by Properly Trained Personnel. Improper Use, Misuse, or Lack of Maintenance Could Cause Injury to Persons or Property. Photos used in this brochure are illustrative only. We reserve the right to make changes at any time without notice. Information contained within this literature is believed to be the most accurate available at the time of printing.

Please contact one of the EMP Partner(s) below: